Gas Monitors & Solutions by OBW Technologies

Siemens Magflow

Scope Of Work Flow Measurement

Product Details

Siemens Flow Metering

The SITRANS F M  MAG 5100 W  with its patented liners of hard rubber NBR or ebonite and EPDM is a sensor for all water applications such as ground water, drinking water, cooling water, waste water, sewage or sludge applications.
In order to  have a complete flowmeter, please  combine it  with one of the following MAG transmitters:


Siemens Magflow 5000SITRANS F M MAG 5000:
Cost efficient transmitter, accuracy of + 0.4 % of flow rate




Siemens Magflow 6000SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate




Siemens Magflow 6000 ISITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate

The sensor can be combined with the energy calculator  SITRANS FUE950

Application examples: Water abstraction, Water distribution network, Waste water and as custody transfer water meter or cooling meter.



 Meassuring range 0 to 10 m/s
 Nominal Sizes From DN 15 to DN 2000 (1″ to 78″)
 Accuracy 0.2 % ±2.5 mm/s
 Operating Pressure Max. 16 bar (Max. 150 psi)
 Ambient temperature From -40 to 70 °C (-40 to 158 °F)
 Medium Tempreature From -10 to 70 °C (14 to 158 °F)
 Liners EPDM NBR hard rubber Ebonite hard rubber
 Electrodes Hastelloy C-276
Built-in grounding electrodes
 Material Carbon steel, with corrosion resistant
two-component epoxy coating
 Drinking Water Approvals EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270,
ACS and BelgAqua
NBR: NSF/ANSI Standard 61, WRAS
Ebonite: WRAS
 Custody Transfer Approvals OILM R 49
PTB K7.2 (Germany)
BEV OE12/C040 (Austria)
 General approval MCERTS Sira Certificate No. MC080136/00


  • Short lead time
  • Rugged NBR hard rubber liner for all water and wastewater applications
  • EPDM liner specifically for drinking water applications requiring special approvals
  • Ebonite liner for drinking water, water and wastewater applications
  • Increased low flow accuracy for water leakage detection (NBR or EPDM liner)
  • Suitable for direct burial and constant flooding (IP68)
  • Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint